Description
- Smart control servo with 2 working modes
- Stall torque (Kg.cm): 15(6V), 16.5(7.4V), 17(8.4V)
- Operating speed (RPM): 55(6V), 65(7.4V), 73(8.4V)
- Gear ratio: 275:1
- Weight: 56g
The FT-SCServo Smart Servo Motor is a smart control servo which feedbacks the value of position, temperature, load, speed and input voltage. It can work in servo mode and wheel mode. The servo mode can be used with multi-joint robots since these robots can be controlled with specific angles. The wheel mode can be used with wheel-type operation robots since motors of the robots spin infinitely. The range from 0 to 253 (0xFD) can be used for the ID (The factory default setting is ID 1) and, especially, 254(0xFE) is used as the Broadcast ID. The baud rate from 38400 bps to 1M bps can be used.
- 1x Servo
- 2x U Brackets
- 2x Round horns
- Size: 40 x 20 x 40.5mm
- Weight: 56g (1.98oz)
PDF File
- Gear type: Metal
- Operating voltage: 6V~8.4V
- Stall current (A): 1.5A (7.4)
- Bus interface: TTL level multi drop
- Operating angle: 200° (servo mode)
- Communication speed: 38400bps ~ 1 Mbps
- Position sensor (resolution): Potentiometer (215°/1024)